3D Printing

WASP Presents DeltaWASP 3MT – Pricipal of 4D Simulations

Big dimensions printing DeltaWASP 3MT is a self-production instrument used to create big dimensions objects (one cubic meter maximum), freely and personalized. It can print furniture like chairs, tables, lamps, coat racks, umbrella stands. Moreover, it is an ideal tool for designers and architects, technical schools, universities, research centers. Another application is in the automotive

[ Read More ]

Medical Implants with the help of 3D Printing

The metal surface coatings applied to orthopedic implants allow a three-dimensional interconnected array of pores throughout the coating thickness, which in turn helps to promote bone tissue in-growth and provide long-term stability of the implant. The traditional processes used to apply these coatings including sintering and plasma spraying. The introduction of direct metal transfer (DMT)

[ Read More ]

Cutting Time & Costs of Molds with 3D Printing

Molding is the process of manufacturing by shaping liquid or flexible raw material using a rigid frame called a mold. Plastic injection molding is one of the most commonly used manufacturing processes in the world today. However, traditional molding process requires high initial tooling cost, and engineers are often limited to many design restrictions. Use

[ Read More ]

Post Processing of 3D Printed Parts

In a perfect world, 3D prints would all leave our printers prepared to go. In any case, as anybody with a 3D printer knows, this is not generally the situation, and eventually a large portion of us will wind up attempting to flawlessly expel underpins from our prints without leaving an uneven surface on our

[ Read More ]

Do’s & Dont’s for FDM Printers

Before Printing Do’s Dont’s Check for power supply Never print a file before removing the last printed component Remove the last printed part form bed if any Do not remove-and-plug power supply again and again Heat the Nozzle up to the extrusion temperature of last printed material if previous material was of higher extrusion temperature Do

[ Read More ]

TOP TEN TIPS FOR 3D PRINTING – PART 2

TOP TEN TIPS FOR 3D PRINTING – PART 2 1) Print in air in characterize a filament First raise up your printing actuators (XY) or Lower down the bed (Z) to 100 mm to have a gap Lower temp 10 degrees at a time until the extruder clicks … Low limit Raise temp until the

[ Read More ]

TOP TEN TIPS FOR 3D PRINTING – PART 1

TOP TEN TIPS FOR 3D PRINTING-PART 1 1) Always Use Slicer software’s print previews Watch the movie repeatedly. It can save your hours for failed prints. 2) The First Five Layers are the “only” layers. For larger prints that will get finished after long time are required to be checked for first five layers (very

[ Read More ]