top of page
d2.png

PEKK-A+CF15

PEKK+CF15 Ultra Polymer is made using PEKK-A [60/40 copolymer] and 15% high modulus chopped carbon fiber. This polymer is used in a wide variety of end-use applications where exceptional thermal, mechanical, and chemical resistance is required.

Typical applications

Ptototyping

Extruder Temp

360-390°C

Ptototyping

Bed Temp

120-140°C

Ptototyping

Drying Specs

120°C for 4+ hours as needed

Benefits

  • Easier to print than CF PEEK
  • Wide processing window from 360-390°C (ideal), up to 430°C if needed
  • Tg of 160°C, HDT of 150°C, and a Tm of 305°C
  • Inherently flame resistant base resin (UL94 V-0)
  • Base resin with low smoke generation and outgassing
  • Excellent mechanical, thermal, and chemical resistances
bottom of page